Tracker 2000-2004

Rear Main Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Transmission
     
    Clutch assembly, if equipped
     
    Flywheel
     
    Rear main seal
     

  4.  

To install:

  1. Install or connect the following:

    Rear main seal flush with the cylinder block
     
    Flywheel. Tighten the bolts in a crossing pattern to 58 ft. lbs. (79 Nm) for 1.6L engines or to 51 ft. lbs. (69 Nm) for all other engines.
     
    Clutch assembly, if equipped
     
    Transmission
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo