Tracker 2000-2004

Multi-Function (Combination) Switch

Print

Removal & Installataion



  1. Disconnect the negative battery cable.
  2.  
  3. Disable the SIR system, as outlined in the Chassis Electrical Section.
  4.  
  5. Remove the steering wheel from the steering column.
  6.  
  7. Remove the IP steering column opening trim plate.
  8.  
  9. Remove the 3 screws from the steering column lower cover.
  10.  
  11. Separate the upper cover and the lower cover, then remove them.
  12.  
  13. Disconnect all connectors for the inflatable restraint steering wheel module coil and combination switch assembly.
  14.  
  15. Remove the inflatable restraint steering wheel module coil and combination switch assembly.

    Click image to see an enlarged view

    Fig. Remove the inflatable restraint steering wheel module coil and combination switch assembly.

  16.  

To install:

  1. Install the inflatable restraint steering wheel module coil and combination switch to the steering column.
  2.  
  3. Install the inflatable restraint steering wheel module coil and combination switch electrical connectors.
  4.  
  5. Secure the SIR coil and combination switch wiring harness to the steering column with the retaining bands.
  6.  
  7. Install the upper steering column cover  and the lower steering column cover  to the steering column.
  8.  
  9. Secure the steering column covers with the 3 screws.
  10.  
  11. Install the IP steering column opening trim plate.
  12.  
  13. Install the steering wheel to the steering column.
  14.  
  15. Enable the SIR.
  16.  
  17. Connect the negative battery cable.
  18.  

 
label.common.footer.alt.autozoneLogo