Tracker 2000-2004

Relieving Fuel System Pressure

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Detach the wiring harness connector from the fuel pump relay, located under the left-hand side of the instrument panel near the ECM.
  4.  
  5. Start the engine and run it until it stops from lack of fuel. Crank the engine 2-3 times for a 3 second period. The fuel lines should now be depressurized.
  6.  
  7. After servicing, reattach the wiring harness connector to the fuel pump relay.
  8.  

 
label.common.footer.alt.autozoneLogo