Honda CRV/Odyssey 1995-2000 Repair Information

Diagnostic Connector

Print

OBD-I SYSTEMS 1995 Odyssey Models



The Service Check Connector (SCS) is a two wire electrical connector with a blue housing located under the dash near the center console, on the passenger side of the vehicle.

The Diagnostic Trouble Codes (DTCs) on this model are displayed as blink codes.

See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: The SCS Service Connector is used to access the blink codes on 1995 Odyssey models. A paper clip can be substituted by carefully back-probing the connector

OBD-II SYSTEMS



The 16-pin On Board Diagnostic version II (OBD-II) compliant Data Link Connector (DLC) is used to access the Diagnostic Trouble Codes (DTCs) using an OBD-II compliant Data Scan Tool (DST).

CRV Models

The 16-pin OBD-II compliant DLC is an electrical connector with a gray housing located under the dash near the center console, on the passenger side of the vehicle.

The two wire electrical connector with a blue housing next to the DLC is the Service Check Connector (SCS).

1996-98 Odyssey Models

The 16-pin OBD-II compliant DLC is an electrical connector with a gray housing located under the dash near the center console, on the passenger side of the vehicle.

The Service Check Connector (SCS) is a two wire electrical connector with a blue housing located on the passenger side of the vehicle under the dash.

1999-00 Odyssey Models

The 16-pin OBD-II compliant DLC is an electrical connector with a gray housing located under the dash behind the center console one the driver's side of the vehicle.

The two wire Service Check Connector (SCS) is not used on these models.

See Figure 2

Click image to see an enlarged view

Fig. Fig. 2: The 16-pin DLC connector is standard on all OBD-II compliant vehicles

 
AutoZone Logo