Tucson 2006-2008

Removal & Installation

Print

Specific to:

Hyundai Tucson 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the coolant to a level below the bottom of the sensor.
  4.  
  5. Disconnect the ground cable from the battery and then remove the sensor connector.
  6.  
  7. Remove the Engine Coolant Temperature (ECT) sensor.
  8.  

To install:

  1. Reverse the removal procedure.
  2.  
  3. Tighten the sensor to 15-29 ft. lbs. (20-39 Nm).
  4.  

 
label.common.footer.alt.autozoneLogo