Tucson 2006-2008

Ignition Coil Pack

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the engine cover, if necessary.
  4.  
  5. Disconnect the spark plug cables and ignition coil connectors.
  6.  
  7. Remove the ignition coil pack (A).
  8.  
  9. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Remove the ignition coil pack (A)-2.0L engine



    Click image to see an enlarged view

    Fig. Remove the ignition coil pack-2.7L engine

  10.  

Testing



2.0L Engine

Specific to:

Hyundai Tucson 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the spark plug cables from the ignition coil.
  4.  
  5. Connect and use the ohmmeter probes to measure the primary coil resistance between terminals 1-2 and 1-3.
  6.  
  7. Standard value: 0.58 kohms plus or minus 10 percent.
    CAUTION
    When measuring the resistance of the secondary coil, disconnect the ignition coil connector.



    Click image to see an enlarged view

    Fig. Testing the primary coil resistance of the ignition coil pack-2.0L engine

  8.  
  9. Measure the secondary coil resistance between the high-voltage terminal for the No. 1 and No. 4 cylinders, and between the high-voltage terminals for the No. 2 and No. 3 cylinders.
  10.  
  11. Standard value: 8.8 kohms plus or minus 15 percent.

    Click image to see an enlarged view

    Fig. Testing the secondary coil resistance of the ignition coil pack-2.0L engine

  12.  

2.7L Engine

Specific to:

Hyundai Tucson 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the spark plug cables from the ignition coil.
  4.  
  5. Connect and use the ohmmeter probes to measure the primary coil resistance between terminals 1-4, 2-4, and 3-4.
  6.  
  7. Standard value: 0.96 kohms plus or minus 10 percent.
    CAUTION
    When measuring the resistance of the secondary coil, disconnect the ignition coil connector.



    Click image to see an enlarged view

    Fig. Testing the primary coil resistance of the ignition coil pack-2.7L engine

  8.  
  9. Measure the secondary coil resistance between the high-voltage terminals for the No. 1 and No. 4 cylinders, No. 2 and No. 5 cylinders, and No. 3 and No. 6 cylinders.
  10.  
  11. Standard value: 12.5 kohms plus or minus 15 percent.

    Click image to see an enlarged view

    Fig. Testing the secondary coil resistance of the ignition coil pack-2.7L engine

  12.  

 
label.common.footer.alt.autozoneLogo