Tucson 2006-2008

Exhaust Manifold

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Engine cover
     
    Front Oxygen Sensor (O 2 S) connector
     
    Front muffler
     
    Manifold heat shield
     
    Exhaust manifold

    Click image to see an enlarged view

    Fig. Exhaust manifold exploded view-2.0L engine



    Click image to see an enlarged view

    Fig. Exhaust manifold exploded view-2.7L engine

     

  4.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Observe the following torques:
    1. 2.0L Engine

      Exhaust manifold: 32-40 ft. lbs. (43-55 Nm)
       
      Manifold heat shield: 12-16 ft. lbs. (17-22 Nm)
       

    2.  
    3. 2.7L Engine

      Exhaust manifold: 22-26 ft. lbs. (30-35 Nm)
       
      Manifold heat shield: 12-16 ft. lbs. (17-22 Nm)
       
      Front exhaust pipe: 22-30 ft. lbs. (30-40 Nm)
       

    4.  

  4.  

 
label.common.footer.alt.autozoneLogo