Tucson 2006-2008

Sunroof

Print

Power Sunroof



Diagnosis & Testing
Motor

Specific to:

Hyundai Tucson 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the sunroof motor.
  6.  
  7. Disconnect the electrical connections.
  8.  
  9. Connect the terminals, as the below table indicates, and check that the sunroof unit operates accordingly.

    Click image to see an enlarged view

    Fig. Sunroof motor connector end view



    Click image to see an enlarged view

    Fig. Connect the terminals according to table and check that the sunroof unit operates accordingly

  10.  
  11. If any test indicates a problem, find and correct the cause.
  12.  
  13. Replace the sunroof motor found faulty.
  14.  

Switch

Specific to:

Hyundai Tucson 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Open the sunglass case cover in the overhead console.
  6.  
  7. Remove the 2 screws holding the overhead console.
  8.  
  9. Disconnect the electrical connector, then remove the overhead console lamp assembly from the headliner.
  10.  
  11. Check for continuity between the terminals as shown in the table. If the continuity is not as specified, replace the sunroof switch.

    Click image to see an enlarged view

    Fig. Sunroof switch connector end view



    Click image to see an enlarged view

    Fig. Continuity table for testing the sunroof switch

  12.  

Removal & Installation


Click image to see an enlarged view

Fig. Sunroof component locations



Click image to see an enlarged view

Fig. Sunroof assembly components

Motor

Specific to:

Hyundai Tucson 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the overhead console.
  6.  
  7. Remove the 3 sun roof motor mounting screws.
  8.  
  9. Disconnect the 10P electrical connector (A) from the sunroof motor.
  10.  
  11. Remove the sunroof motor (B).
  12.  
  13. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Disconnect the electrical connector (A) and remove the sunroof motor (B)

  14.  

Switch

Specific to:

Hyundai Tucson 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Open the sunglass case cover from the overhead console.
  6.  
  7. Remove the 2 screws holding the overhead console.
  8.  
  9. Disconnect the 6P switch connector.
  10.  
  11. Disconnect the 2P map lamp connector.
  12.  
  13. Remove the overhead console lamp and sunroof switch.
  14.  
  15. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Remove the 2 screws holding the overhead console

  16.  

 
label.common.footer.alt.autozoneLogo