Tucson 2006-2008

Lower Control Arms


Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions Section.
  3. Remove or disconnect the following:

    Front wheel
    Lower ball joint
    Lower control arm mounting bolts
    Lower control arm

    Click image to see an enlarged view

    Fig. View of front lower control arm assembly and related components



To install:

  1. Install or connect the following:

    Lower control arm and tighten the front bolt to 74-89 ft. lbs. (100-120 Nm). Tighten the rear bolt to 103-118 ft. lbs. (140-160 Nm)
    Lower ball joint and tighten the nut to 74-89 ft. lbs. (100-120 Nm)
    Stabilizer bar link and tighten the nut to 25-33 ft. lbs. (35-45 Nm)
    Front wheel

  3. Check and/or adjust the wheel alignment.