Tucson 2006-2008

Fuel Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve the fuel system pressure. Refer to Relieving Fuel System Pressure.
  4.  
  5. Remove the second seat.
  6.  
  7. Open the carpet over the fuel pump.
  8.  
  9. Remove the service cover (A) from on top of the fuel pump.

    Click image to see an enlarged view

    Fig. Remove the service cover (A) from on top of the fuel pump

  10.  
  11. Disconnect the fuel feed line (A) and canister hoses (B).
  12.  
  13. Unscrew the fuel pump mounting bolts (C) and remove the fuel pump assembly.

    Click image to see an enlarged view

    Fig. Disconnect the fuel feed line (A) and canister hoses (B). Unscrew the fuel pump mounting bolts (C)



    Click image to see an enlarged view

    Fig. Remove the fuel pump assembly

  14.  

To install:

  1. Install the fuel pump assembly.
  2.  
  3. Install the fuel pump mounting bolts (C). Tighten the bolts/nuts to 17-26 inch lbs. (2-3 Nm).
  4.  
  5. Connect the fuel feed line (A) and canister hoses (B).
  6.  
  7. Start the vehicle and check for leaks.
  8.  
  9. Install the second seat.
  10.  

 
label.common.footer.alt.autozoneLogo