VW Passat & Audi A4 1990-2000

Fuses

Print

REPLACEMENT

Use the provided plastic fuse puller located in the fuse panel to remove fuses. The lid of the fuse panel has a diagram of the fuse locations and amperage ratings for each circuit. The fuse is removed by simply pulling upward on the fuse with the removal tool.

The fuses are easily checked by visual Inspection. With the ignition switch OFF , pull the fuse out of the holder. Check the fuse filament. It should be continuous and not broken. If the filament is broken, replace the fuse with one of the same amperage rating.



Click image to see an enlarged view

Fig. Use a plastic prytool or if necessary a sturdy key can be inserted into the small slot in the cover. Carefully pry to cover off to remove-1.8L Passat shown



Click image to see an enlarged view

Fig. The cover is held in place by 3 retainers-1.8L Passat shown



Click image to see an enlarged view

Fig. Installed on the cover is a fuse chart and a removal tool-1.8L Passat shown



Click image to see an enlarged view

Fig. The fuses have their amperage rating printed on them. They are color coded as well-1.8L Passat model shown

 
label.common.footer.alt.autozoneLogo