Vibe 2003-2005

Removal & Installation

Print

  1. Remove the radio.
  2.  
  3. Remove the center knob from the HVAC control unit
  4.  
  5. Remove the screw from the control unit.
  6.  
  7. Remove the center console and heater control trim panel.

    Click image to see an enlarged view

    Fig. Remove the center console and heater control trim panel (1)

  8.  
  9. Remove the electrical connector from the HVAC control unit.

    Click image to see an enlarged view

    Fig. Remove the mode control cable from the HVAC control unit

  10.  
  11. Remove the mode control cable from the HVAC control unit.

    Click image to see an enlarged view

    Fig. HVAC control unit

  12.  
  13. Remove the following from the HVAC control unit:
    1. The temperature control cable
    2.  
    3. The A/C cable
    4.  

  14.  
  15. Remove the HVAC control unit.
  16.  
  17. Remove the following from the HVAC control unit:
    1. The mode control and temperature control knobs
    2.  
    3. The lamp bulbs
    4.  

  18.  

To install:

  1. Install the following to the HVAC control unit:
    1. The lamp bulbs
    2.  
    3. The mode control and temperature control knobs
    4.  
    5. The electrical connector
    6.  
    7. The mode control cable
    8.  
    9. The temperature control cable
    10.  
    11. The A/C cable
    12.  

  2.  
  3. Install the HVAC control unit to the instrument panel.
  4.  
  5. Install the center console and heater control trim panel (1). Secure the panel with the screw.
  6.  
  7. Install the center knob to the HVAC control unit.
  8.  
  9. Adjust the cables as necessary, refer to the following:
  10.  
  11. Install the radio.
  12.  

  1. Remove the radio.
  2.  
  3. Remove the center knob from the HVAC control unit
  4.  
  5. Remove the screw from the control unit.
  6.  
  7. Remove the center console and heater control trim panel.

    Click image to see an enlarged view

    Fig. Remove the center console and heater control trim panel (1)

  8.  
  9. Remove the electrical connector from the HVAC control unit.

    Click image to see an enlarged view

    Fig. Remove the mode control cable from the HVAC control unit

  10.  
  11. Remove the mode control cable from the HVAC control unit.

    Click image to see an enlarged view

    Fig. HVAC control unit

  12.  
  13. Remove the following from the HVAC control unit:
    1. The temperature control cable
    2.  
    3. The A/C cable
    4.  

  14.  
  15. Remove the HVAC control unit.
  16.  
  17. Remove the following from the HVAC control unit:
    1. The mode control and temperature control knobs
    2.  
    3. The lamp bulbs
    4.  

  18.  

To install:

  1. Install the following to the HVAC control unit:
    1. The lamp bulbs
    2.  
    3. The mode control and temperature control knobs
    4.  
    5. The electrical connector
    6.  
    7. The mode control cable
    8.  
    9. The temperature control cable
    10.  
    11. The A/C cable
    12.  

  2.  
  3. Install the HVAC control unit to the instrument panel.
  4.  
  5. Install the center console and heater control trim panel (1). Secure the panel with the screw.
  6.  
  7. Install the center knob to the HVAC control unit.
  8.  
  9. Adjust the cables as necessary, refer to the following:
  10.  
  11. Install the radio.
  12.  

 
label.common.footer.alt.autozoneLogo