Vibe 2003-2005

Ignition Switch

Print

Removal & Installation



  1. Disable the Zone 3 of the SIR (air bag) system, as outlined in Chassis Electrical.
  2.  
  3. Remove the trim covers from the steering column.
  4.  
  5. Disconnect the ignition switch electrical connector.

    Click image to see an enlarged view

    Fig. Exploded view of ignition components

  6.  
  7. Remove the 2 screws (8,9) and the ignition switch (7).
  8.  

To install:

  1. Install the ignition switch (7) and the 2 screws (8,9).
  2.  
  3. Connect the ignition switch electrical connector.
  4.  
  5. Install the trim covers to the steering column.
  6.  
  7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  8.  

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the trim covers from the steering column.
  4.  
  5. Disconnect the ignition switch electrical connector.
  6.  
  7. Remove the 2 screws and the ignition switch.
  8.  

To install:

  1. Install the ignition switch and the screws.
  2.  
  3. Connect the ignition switch electrical connector.
  4.  
  5. Install the trim covers to the steering column.
  6.  

 
label.common.footer.alt.autozoneLogo