Vibe 2003-2005

Windshield Wiper System

Print

Wiper Motor



Removal & Installation
  1. Remove the plastic nut cover from the wiper arm.
  2.  
  3. Remove the nut and the wiper arm.
  4.  
  5. Remove the air inlet grille panel.
  6.  
  7. Disconnect the wiper motor electrical connector.
  8.  
  9. Remove the 2 wiper motor assembly bolts.
  10.  
  11. Remove the wiper motor assembly from the engine compartment
  12.  

To install:

  1. Installation is the reverse of removal. Tighten the wiper motor bolts to 48 inch lbs. (5.5 Nm) and the wiper arm nut to 15 ft. lbs. (20 Nm).

    Click image to see an enlarged view

    Fig. Wiper motor (3) mounting

  2.  

 
label.common.footer.alt.autozoneLogo