Vibe 2006-2007

Master Cylinder

Print

Removal & Installation



  1. Remove the brake booster assembly from the vehicle.
  2.  
  3. Disconnect the clutch reservoir tube from the clutch master cylinder assembly.
  4.  
  5. Disconnect the pipe from the clutch master cylinder.
  6.  
  7. Remove the clutch master cylinder push rod clevis pin and clip.
  8.  
  9. Remove the 2 clutch master cylinder retaining nuts.
  10.  
  11. Remove the clutch master cylinder from the vehicle.
  12.  

To install:

  1. Install the clutch master cylinder in the vehicle.
  2.  
  3. Install the clutch master cylinder retaining nuts and tighten to 9 ft. lbs. (12 Nm).
  4.  
  5. Install the clevis pin and clip.
  6.  
  7. Install the hydraulic pipe to the clutch master cylinder.
  8.  
  9. Install the brake booster assembly in the vehicle.
  10.  
  11. Connect the reservoir tube to the clutch master cylinder.
  12.  
  13. Bleed the clutch.
  14.  

 
label.common.footer.alt.autozoneLogo