Vibe 2006-2007

Oil Pan

Print

Removal & Installation



1ZZ-FE Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Drain the engine oil.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Undercovers
     
    Front exhaust pipe
     
    Oil pan mounting bolts and nuts
     
    Oil pan, cutting off the applied sealer.
     

  6.  

To install:

  1. Remove any old sealant from the oil pan flange and thoroughly clean the sealing surface.
  2.  
  3. Install or connect the following:

    Oil pan. Tighten the bolts and nuts in several passes to 80 inch lbs. (9 Nm).
     
    Front exhaust pipe
     
    Negative battery cable
     
    Undercovers
     

  4.  
  5. Fill the engine with clean oil.
  6.  
  7. Start the vehicle, check for leaks and repair if necessary.

    Click image to see an enlarged view

    Fig. Apply sealant to the oil pan as shown-1.8L (1ZZ-FE) engine

  8.  

2ZZ-GE Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Drain the engine oil.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding.
     
    Undercovers
     
    Front exhaust pipe
     
    Oil pan mounting bolts and nuts
     
    Oil pan, cutting off the applied sealer
     

  6.  

To install:

  1. Remove any old sealant from the oil pan flange and thoroughly clean the sealing surface.
  2.  
  3. Install or connect the following:

    Oil pan. Tighten the bolts and nuts in several passes to 80 inch lbs. (9 Nm).
     
    Front exhaust pipe
     
    Negative battery cable
     
    Undercovers
     

  4.  
  5. Fill the engine with clean oil.
  6.  
  7. Start the vehicle, check for leaks and repair if necessary.
  8.  

 
label.common.footer.alt.autozoneLogo