Vibe 2006-2007

Testing

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the fuel pump and sender electrical connector.
    NOTE
    Do these tests within 10 seconds to prevent the coil from burning out. Keep the pump as far away from the battery as possible and always do the switching at the batter side.

  4.  
  5. Connect battery voltage to terminal 5 of the connector and a ground connection to terminal 4 of the connector. The fuel pump should operate. If not replace the pump.

    Click image to see an enlarged view

    Fig. Connect battery voltage to terminal 5 of the connector and a ground connection to terminal 4 of the connector. The fuel pump should operate. If not replace the pump

  6.  

 
label.common.footer.alt.autozoneLogo