Vibe 2006-2007

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove some fluid from the reservoir with a suction pump.
  4.  
  5. Remove or disconnect the following:

    Rear wheels
     
    Clip and both anti-rattle springs
     
    Two pad guide pins
     
    Pads with the shims
     

  6.  

To Install:

Click image to see an enlarged view

Fig. Exploded view of the front pads and related components

  1. Compress the caliper piston using a C-clamp or other suitable tool.
  2.  
  3. Install or connect the following:

    New anti-squeal shims, apply disc brake grease to the inside of the shim before installation
     
    Inner pad with the wear indicator facing upwards
     
    Outer pad
     
    Two pad guide pins
     
    Anti-rattle springs and the clip
     

  4.  
  5. Fill the reservoir with fluid and bleed the brake system. Adjust the parking brake if necessary.

    Rear wheels
     

  6.  

 
label.common.footer.alt.autozoneLogo