Vibe 2006-2007

Wheel Bearings

Print

Removal & Installation



  1. Remove the rear knuckle.

    Click image to see an enlarged view

    Fig. Remove the dust deflector (2)

  2.  
  3. Remove the dust deflector (2).
  4.  
  5. Remove the 4 bolts.
  6.  
  7. Remove the wheel bearing and hub assembly.
  8.  

To install:

Click image to see an enlarged view

Fig. Install the wheel bearing and hub assembly and the 4 bolts (2,3,4,and 5).

  1. Install the wheel bearing and hub assembly and the 4 bolts. Tighten the bolts to 41.3 ft. lbs. (56 Nm).
  2.  
  3. Use a hydraulic press in order to install a NEW dust deflector.
  4.  
  5. Install the rear knuckle.
  6.  

 
label.common.footer.alt.autozoneLogo