Volkswagen Air Cooled 1949-1969 Repair Guide

Turn Signal Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the steering wheel.
  4.  
  5. Remove the four turn signal switch securing screws.
  6.  
  7. Disconnect the turn signal switch wiring plug under the steering column.
  8.  
  9. Pull the switch and wiring guide rail up and out of the steering column.
  10.  
  11. Installation is the reverse of the removal procedure. Make sure the spacers located behind the switch, if installed originally, are in position. The distance between the steering wheel and the steering column housing is 0.08-0.12 in. Install the switch with the lever in the central position.
  12.  

 
label.common.footer.alt.autozoneLogo