Volkswagen Cars 2000-05

Manual Bleeding

Print

  1. Build-up brake pressure in brake system by pumping brake pedal.
  2.  
  3. Connect the hose from bleeder bottle to brake bleeder valve at each wheel in the following sequence:
    1. 1 - Right rear caliper
    2.  
    3. 2 - Left rear caliper
    4.  
    5. 3 - Right front caliper
    6.  
    7. 4 - Left front caliper
    8.  

  4.  
  5. Open bleeder valve.
  6.  
  7. Hold brake pedal down, close bleeder screw.
    NOTE
    The brake fluid level in the reservoir must not fall below the MIN mark during bleeding. Release brake pedal. Repeat operation until brake fluid flows without air bubbles.

  8.  

 
label.common.footer.alt.autozoneLogo