Volkswagen Cars 2000-05

Cruise Control Module

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. On models with the 16V engine, the control unit is in the center console. On all other models, the control unit is under the right side of the dashboard.
  4.  
  5. Detach the electrical connector from the control unit.
  6.  
  7. Remove the bracket retaining screw and remove the control unit.
  8.  

To install:

  1. Plug in the electrical connector to the control unit.
  2.  
  3. Secure the control unit in place with the retaining screw.
  4.  
  5. Connect the negative battery cable. Road test the vehicle and check the cruise control operation.
  6.  

  1. Disconnect the negative battery cable.
  2.  
  3. The control unit is in the center console.
  4.  
  5. On A4 and 1995-00 Passat models, remove the glove box to allow access.
  6.  
  7. Detach the electrical connector from the control unit.
  8.  
  9. Remove the mounting fasteners and remove the control unit.
  10.  

To install:

  1. Plug in the electrical connector to the control unit.
  2.  
  3. Secure the control unit in place with the retaining screw.
  4.  
  5. Connect the negative battery cable. Road test the vehicle and check the cruise control operation.
  6.  

 
label.common.footer.alt.autozoneLogo