Volkswagen Cars 2000-05

2.0L L4 - Auto 4

Print

Trouble Code: P0459



Evaporative Emission System Purge Control Valve Circuit High

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister has a leak or a poor seal
 
ECM has failed
 

Trouble Code: P0480



Fan 1 Control Circuit

Possible Causes:



Check connection of coolant fan control module according to wiring diagram
 
Short to B+ or ground in the circuit
 
Circuit open
 

Trouble Code: P0501



Vehicle Speed Sensor or PSOM Range/Performance

Possible Causes:



VSS signal circuit is open or shorted to ground
 
VSS harness circuit is shorted to ground
 
VSS harness circuit is shorted to power
 
VSS circuit open between the ECM and related control module
 
VSS or wheel speed sensors circuits are damaged
 
Modules connected to VSC/VSS harness circuits are damaged
 
Mechanical drive mechanism for the VSS is damaged
 

Trouble Code: P0506



Idle Air Control System RPM Lower Than Expected

Possible Causes:



Air inlet is plugged or the air filter element is severely clogged
 
IAC circuit is open or shorted
 
IAC circuit VPWR circuit is open
 
IAC solenoid is damaged or has failed
 
ECM has failed
 
The VSS has failed
 

Trouble Code: P0507



Idle Air Control System RPM Higher Than Expected

Possible Causes:



Air intake leak located somewhere after the throttle body
 
IAC control circuit is shorted to chassis ground
 
IAC solenoid is damaged or has failed
 
Throttle Valve Control module has failed or is clogged with carbon
 
ECM has failed
 
The VSS has failed
 

Trouble Code: P0510



Closed Throttle Position Switch Malfunction

Possible Causes:



Throttle Valve Control module has failed
 
Throttle Valve Control module is shorted to ground
 
Throttle Valve Control module is open
 
ECM has failed
 

Trouble Code: P0513



Incorrect Immobilizer Key

Possible Causes:



The key is incorrect or damaged
 
ECM has failed
 
Short within the circuit
 

Trouble Code: P0544



Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 1

Possible Causes:



Exhust gas temperature sensor is faulty
 
EGT control circuit is shorted to chassis ground
 
ECM has failed
 

Trouble Code: P0545



Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 1

Possible Causes:



Exhust gas temperature sensor is faulty
 
EGT control circuit is shorted to chassis ground
 
ECM has failed
 

Trouble Code: P0546



Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 1

Possible Causes:



Exhust gas temperature sensor is faulty
 
EGT control circuit is shorted to chassis ground
 
ECM has failed
 

Trouble Code: P0560



System Voltage Malfunction

Possible Causes:



Alternator damaged or faulty
 
Battery voltage low or insufficient
 
Fuses blown or circuits open
 
Battery connection to terminal not clean
 
Voltage regulator has failed
 

Trouble Code: P0562



System Voltage Low

Possible Causes:



Alternator damaged or faulty
 
Battery voltage low or insufficient
 
Fuses blown or circuits open
 
Battery connection to terminal not clean
 
Voltage regulator has failed
 

Trouble Code: P0563



System Voltage High

Possible Causes:



Alternator damaged or faulty
 
Battery voltage low or insufficient
 
Fuses blown or circuits open
 
Battery connection to terminal not clean
 
Voltage regulator has failed
 

Trouble Code: P0568



Cruise Control Set Signal Incorrect Signal

Possible Causes:



Cruise control system is damaged
 
Control circuit is shorted to chassis ground
 

Trouble Code: P0571



Cruise/Brake Switch (A) Circuit Malfunction

Possible Causes:



Brake light switch is faulty
 
Control circuit is shorted to chassis ground
 

Trouble Code: P0600



Serial Communication Link (Data BUS) Message Missing

Possible Causes:



ECM has failed
 
CAN data bus wires have short circuited to each other
 

Trouble Code: P0601



Internal Control Module Memory Check Sum Error

Possible Causes:



Battery terminal corrosion, or loose battery connection
 
Connection to the ECM interrupted, or the circuit has been opened
 
Reprogramming error has occurred
 
ECM has failed and needs replacement. Remember to check for Aftermarket Performance Products before replacing a ECM.
 

Trouble Code: P0602



Control Module Programming Error

Possible Causes:



During the VID reprogramming function, the Vehicle ID (VID) data block failed during reprogramming wit the Scan Tool.
 
Battery terminal corrosion, or loose battery connection
 
Connection to the ECM interrupted, or the circuit has been opened
 
Reprogramming error has occurred
 
ECM has failed and needs replacement. Remember to check for Aftermarket Performance Products before replacing a ECM.
 

Trouble Code: P0604



Internal Control Module Random Access Memory (RAM) Error

Possible Causes:



Battery terminal corrosion, or loose battery connection
 
Connection to the ECM interrupted, or the circuit has been opened
 
Reprogramming error has occurred
 
ECM has failed and needs replacement. Remember to check for Aftermarket Performance Products before replacing a ECM.
 

Trouble Code: P0605



ECM Read Only Memory (ROM) Test Error

Possible Causes:



An attempt was made to change the module calibration, or a module programming error may have occurred
 
Clear the trouble codes and then check for this trouble code. If it resets, the ECM has failed and needs replacement.
 
Aftermarket performance products may have been installed.
 
The Transmission Control Module (TCM) has failed.
 

Trouble Code: P0606



ECM Internal Communication Error

Possible Causes:



Clear the trouble codes and then check for this trouble code. If it resets, the ECM has failed and needs replacement.
 
Remember to check for signs of Aftermarket Performance Products installation before replacing the ECM.
 

Trouble Code: P0613



TCM Processor

Possible Causes:



TCM failed
 
ECM failed
 
Replacement control module ID doesn-t match old control module ID
 

Trouble Code: P0614



ECM / TCM Incompatible

Possible Causes:



TCM failed
 
ECM failed
 
Circuit shorting between ECM and TCM
 
Replacement control module ID doesn-t match old control module ID
 

Trouble Code: P0628



Fuel Pump "A" Control Circuit Low

Possible Causes:



Fuel Pressure Regulator Valve is faulty
 
Fuel Pressure Sensor is faulty
 
Fuel Pump (FP) Control Module is faulty
 
Fuel pump is faulty
 

Trouble Code: P0638



Throttle Actuator Control Range/Performance Bank 1

Possible Causes:



Throttle Position (TP) sensor is faulty
 
Throttle valve control module is faulty
 
ECM is faulty
 
Circuit wires have short circuited to each other, to vehicle Ground (GND) or to B+.
 
Accelerator pedal module is faulty
 

Trouble Code: P0641



Sensor Reference Voltage "A" Circuit Open

Possible Causes:



Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Control Module (TCM) needs replacing
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 

Trouble Code: P0642



Sensor Reference Voltage "A" Circuit Low

Possible Causes:



Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Control Module (TCM) needs replacing
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 

Trouble Code: P0685



ECM Power Relay Control Circuit Open

Possible Causes:



Generator has failed or is damaged
 
Fuel pump relay is faulty
 
Circuit is grounded to power or chassis
 
ECM has failed
 

Trouble Code: P0686



ECM/PCM Power Relay Control Circuit Low

Possible Causes:



Generator has failed or is damaged
 
Fuel pump relay is faulty
 
Circuit is grounded to power or chassis
 
ECM has failed
 

Trouble Code: P0687



ECM/PCM Power Relay Control Circuit High

Possible Causes:



Generator has failed or is damaged
 
Fuel pump relay is faulty
 
Circuit is grounded to power or chassis
 
ECM has failed
 

Trouble Code: P0688



ECM/PCM Power Relay Control Sense Circuit Open

Possible Causes:



Generator has failed or is damaged
 
Fuel pump relay is faulty
 
Circuit is grounded to power or chassis
 
ECM has failed
 

Trouble Code: P0691



Fan 1 Control Circuit Low

Possible Causes:



Check connection of coolant fan control module according to wiring diagram
 
Short to B+ or ground in the circuit
 
Circuit open
 

Trouble Code: P0692



Fan 1 Control Circuit High

Possible Causes:



Check connection of coolant fan control module according to wiring diagram
 
Short to B+ or ground in the circuit
 
Circuit open
 

Trouble Code: P0700



Transmission Control System Malfunction

Possible Causes:



Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 
Engine Control Module (ECM) is faulty
 
Voltage supply for Engine Control Module (ECM) is faulty
 
Transmission Control Module (TCM) is faulty
 

Trouble Code: P0702



Transmission Control System Electrical

Possible Causes:



Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 
Engine Control Module (ECM) is faulty
 
Voltage supply for Engine Control Module (ECM) is faulty
 
Transmission Control Module (TCM) is faulty
 

Trouble Code: P0704



Clutch Switch Input Circuit Malfunction

Possible Causes:



Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 
Engine Control Module (ECM) is faulty
 
Voltage supply for Engine Control Module (ECM) is faulty
 
Transmission Control Module (TCM) is faulty
 

Trouble Code: P0705



TR Sensor Circuit Malfunction

Possible Causes:



Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 
Engine Control Module (ECM) is faulty
 
Voltage supply for Engine Control Module (ECM) is faulty
 
Transmission Control Module (TCM) is faulty
 

Trouble Code: P0706



TR Sensor Circuit Range/Performance

Possible Causes:



Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 
Engine Control Module (ECM) is faulty
 
Voltage supply for Engine Control Module (ECM) is faulty
 
Transmission Control Module (TCM) is faulty
 

Trouble Code: P0710



Transmission Fluid Temperature Sensor Circuit Malfunction

Possible Causes:



ATF is low, contaminated, dirty or burnt
 
Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 
Engine Control Module (ECM) is faulty
 
Voltage supply for Engine Control Module (ECM) is faulty
 
Transmission Control Module (TCM) is faulty
 

Trouble Code: P0711



Transmission Fluid Temperature Sensor Signal Range/Performance

Possible Causes:



ATF is low, contaminated, dirty or burnt
 
TFT sensor signal circuit has a high resistance condition
 
TFT sensor is out-of-calibration ("skewed") or it has failed
 
ECM has failed
 

 
label.common.footer.alt.autozoneLogo