Volkswagen Cars 2000-05

Seats

Print

Removal & Installation





Click image to see an enlarged view

Fig. Removing the seat from the front track



Click image to see an enlarged view

Fig. Remove the plastic cover from the rear edge of the seat track



Click image to see an enlarged view

Fig. Remove the fasteners from the rear seat. This may require the use of a hex key



Click image to see an enlarged view

Fig. Once all the bolts have been removed, lift the rear seat out

Front Seats
  1. Slide the seat forward to the stop and remove the track cover beside the tunnel.
  2.  
  3. Remove the acorn nut, washer and bolt at the front of the center seat rail.
  4.  
  5. Pull the seat release handle and push the seat back and out of the tracks. Lift the seat out of the vehicle.
  6.  
  7. Installation is the reverse of removal.
  8.  

Passat
Front Seat Backrest
  1. Remove adjustment knob (8).
  2.  
  3. Press the 4 expanding pins (10) of the adjustment lever (9) inward and remove the adjustment lever.
  4.  
  5. Remove the trim (2).
  6.  
  7. Remove the screw (11).
  8.  
  9. Remove the left trim (7).
  10.  
  11. Remove the screws on both sides of the seat and remove backrest (4).
  12.  

To install:

  1. Installation is in reverse order of removal.
  2.  

Front Seats

NOTE
For removal procedures, follow the illustrations provided.



Click image to see an enlarged view

Fig. Removing and installing the cover and cushion for front seat



Click image to see an enlarged view

Fig. Guide the assembly lever (1) between the seat frame (2) and the cover (3); press apart the tabs (arrow A ). Remove the cover and cushion from the seat frame



Click image to see an enlarged view

Fig. Installing the cover and cushion

To install:

Installation is in reverse order of removal.



Click image to see an enlarged view

Fig. Front backrest (headrest removed): remove seat, then remove the backrest. Separate the beading strip of the cover with screwdriver (arrows)



Click image to see an enlarged view

Fig. Exploded view of the front seat

Key list for gnam 93220vwg37:

  1. Seat trim, right
  2.  
  3. Belt lock
  4.  
  5. Seat
  6.  
  7. Backrest
  8.  
  9. Trim collar
  10.  
  11. Adjusting knob (lumbar support)
  12.  
  13. Seat trim, left
  14.  
  15. Adjustment knob (backrest)
  16.  
  17. Adjustment lever (seat height)
  18.  
  19. Expanding pins
  20.  
  21. Screw for left trim
  22.  

Rear Seats
  1. On Golf and Jetta, lift the seat cushion up and pull forward to remove it.
  2.  
  3. On Cabriolet, remove the two screws at the front of the seat cushion and pull forward and up.
  4.  
  5. Release the seat backrest and fold forward.
  6.  
  7. Release the locking lug in the mounting and pull the backrest out of the mounting.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo