Volkswagen Eurovan 2000-03

Bleeding Procedure Without Brake Fluid Filling And Bleeding Unit

Print

  1. Build pressure in brake system by operating (pumping) brake pedal.
  2.  
  3. Open bleeder screw with bleeder bottle hose attached and pedal depressed.
  4.  
  5. Run brake fluid through by pumping pedal.
  6.  
  7. Be sure there is sufficient supply in the brake fluid reservoir.
  8.  
  9. Close bleeder screw with pedal depressed.
  10.  
  11. Repeat procedure until no more air exits, but at least 3x per brake caliper. The proper bleeding sequence is:
    1. Right rear brake caliper
    2.  
    3. Left rear brake caliper
    4.  
    5. Right front brake caliper
    6.  
    7. Left front brake caliper
    8.  

  12.  

 
label.common.footer.alt.autozoneLogo