Volkswagen Eurovan 2000-03

Exhaust Manifold

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect:

    O2 sensor wiring and remove any heat shields that may be in the way.
     
    Exhaust support brackets as necessary.
     
    Front exhaust pipe from the manifold.
     
    Self-locking nuts or bolts and the manifold.
     

  4.  

To install:

  1. Installation is the reverse of removal. Use new gaskets and self-locking nuts. Torque as follows: M8 bolts to 18 ft. lbs. (25 Nm), M10 bolts to 30 ft. lbs. (40 Nm).
  2.  
  3. Check and clear any DTCs.
  4.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect:

    O 2 sensor wiring and remove any heat shields that may be in the way.
     
    Exhaust support brackets as necessary.
     
    Front exhaust pipe from the manifold.
     
    Self-locking nuts or bolts and the manifold.
     

  4.  

To install:

  1. Installation is the reverse of removal. Use new gaskets and self-locking nuts. Torque as follows: M8 bolts to 18 ft. lbs. (25 Nm), M10 bolts to 30 ft. lbs. (40 Nm).
  2.  
  3. Check and clear any DTCs.
  4.  

 
label.common.footer.alt.autozoneLogo