Volkswagen Eurovan 2000-03

Window Systems

Print

Removal & Installation



Motor & Regulator
  1. Remove the door trim, as outlined in this section.
  2.  
  3. Remove the lifting rail with door window glass from window regulator.
  4.  
  5. Slide the door windows upward and secure (using a suitable adhesive tape).
  6.  
  7. Disconnect the harness connector - arrow A in accompanying illustration - of the Left or Right Window Motor or Right Window Motor.
  8.  
  9. Remove the bolts .
  10.  
  11. Disengage the securing clip from the window regulator at door opening.
  12.  
  13. Remove the window regulator with the motor out of upper opening.
  14.  
  15. Installation is the reverse of the removal procedure. Tighten the bolts to 5 ft. lbs. (7 Nm).

    Click image to see an enlarged view

    Fig. Unfasten the bolts (1), disengage the clip (2) from the window regulator at the door opening, then remove the regulator and motor out of the upper opening (arrow)-with power windows

  16.  

Regulator
Power Windows
  1. Remove the door trim, as outlined in this section.
  2.  
  3. Remove the lifting rail with door window glass from window regulator.
  4.  
  5. Slide door window upward and secure (using a suitable adhesive tape).
  6.  
  7. Remove the mounting bolts.
  8.  
  9. Carefully remove the window regulator from the upper opening.
  10.  
  11. Installation is the reverse of the removal procedure. Tighten the bolts to 5 ft. lbs. (7 Nm).

    Click image to see an enlarged view

    Fig. Unfasten the bolts (1), then carefully remove the window regulator from the upper opening (arrow)-with manual windows

  12.  

Switch
  1. Carefully pry out the window regulator (and mirror adjustment) switch and disconnect electrical connectors.
  2.  
  3. Installation is the reverse of the removal procedure.
  4.  

 
label.common.footer.alt.autozoneLogo