Volkswagen Front Wheel Drive 1974-1989 Repair Guide

Control Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the horn pad.
  4.  
  5. Mark the position of the steering wheel to the shaft and remove the wheel.
  6.  
  7. Remove the combination switch retaining screws. Carefully remove the switch from the steering column.
  8.  
  9. Remove the screws retaining the cruise control switch to combination switch and remove the cruise control switch.
  10.  

To install:
  1. Assemble the cruise control switch to the combination switch.
  2.  
  3. Install the combination switch and connect the wiring.
  4.  
  5. Align the marks made for the steering wheel-to-column position and install the steering wheel. Torque the nut to 30 ft. lbs. (40 Nm).
  6.  
  7. Install the horn pad.
  8.  
  9. Connect the battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo