Volkswagen Front Wheel Drive 1974-1989 Repair Guide

Control Unit

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. On models with the 16-valve engine, the control unit is in the center console. On other models, the control unit is usually under the right side of the dashboard.
  4.  
  5. Disengage the electrical connector from the control unit.
  6.  
  7. Remove the bracket retaining screw and remove the control unit.
  8.  

To install:
  1. Plug in the electrical connector to the control unit.
  2.  
  3. Secure the control unit in place with the retaining screw.
  4.  
  5. Connect the negative battery cable. Road test the vehicle and check the cruise control operation.
  6.  

 
label.common.footer.alt.autozoneLogo