Volkswagen Front Wheel Drive 1974-1989 Repair Guide

Fuel Supply Pump

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear seat and the access cover. If there is no access cover, it will be necessary to remove the fuel tank to access the pump.
  4.  
  5. Disconnect the wiring and hoses and unscrew the lock ring.
  6.  
  7. Carefully lift out the pump and gauge sending unit assembly.
  8.  
  9. Installation is the reverse of removal. When installing the assembly, use a new seal.
  10.  

 
label.common.footer.alt.autozoneLogo