Volkswagen Front Wheel Drive 1974-1989 Repair Guide

Rear Section

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

To remove the rubber rings, support the exhaust system and pry the rings from the hangers on the body. When installing the system, leave all bolts and nuts loose until the rings are installed and all parts are properly aligned, then tighten the clamps from front to rear.



Click image to see an enlarged view

Fig. Fig. 1: Rear section of the exhaust system used on 16-valve engines



Click image to see an enlarged view

Fig. Fig. 2: Rear section of the exhaust system commonly found on late model Volkswagens with 8-valve engines

 
label.common.footer.alt.autozoneLogo