Volkswagen Front Wheel Drive 1974-1989 Repair Guide

Turn Signal (Combination) Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the battery ground cable.
  2.  
  3. Remove the steering wheel.
  4.  
  5. Remove the switch retaining screws.
  6.  
  7. Pry the switch housing off the column.
  8.  
  9. Disconnect the electrical plugs at the back of the switch.
  10.  
  11. Remove the switch housing.
  12.  
  13. Install in the reverse order of removal.
  14.  

On the Rabbit, Jetta and Scirocco, tap the spacer sleeve into column (carefully) until there is 0.08-0.16 in. (2-4mm) clearance between the wheel and the hub.

 
label.common.footer.alt.autozoneLogo