Volkswagen Golf/Jetta/Cabriole 1990-1999

Relieving Fuel System Pressure



The fuel injection system operates under high pressure. This makes it necessary to first relieve the system of pressure before servicing. The pressurized fuel, when released, may ignite or cause personal injury.

  1. Disconnect the power to the fuel pump by removing the relay or the fuel pump fuse. Check the list on the fuse box lid to be sure. The fuse can be removed to stop the fuel pump from running. With the engine operating at idle, wait until the engine stalls from fuel starvation.
  3. Switch the ignition OFF and remove the negative battery cable.
  5. Carefully loosen the fuel line on the control pressure regulator or component to be serviced.
  7. Wrap a clean rag around the connection, while loosening, to catch any fuel.
  9. After service is complete, discard the fuel soaked rag in the proper manner and reconnect the negative battery cable, relay or fuses.