Volkswagen Golf/Jetta/Cabriole 1990-1999

Power Sunroof

Print

REMOVAL & INSTALLATION



  1. Open the sunroof halfway and remove the steel clips at the front edge using a plastic wedge tool.
  2.  
  3. Close the sunroof and push the interior panel back all the way.
  4.  
  5. Remove both front guides from the outer panel.
  6.  
  7. Slide the springs at the rear guide in towards the center.
  8.  
  9. Remove the screws and remove the rear support plates in towards the center.
  10.  
  11. Lift the sunroof cover out.
  12.  
  13. Installation is the reverse of removal.
  14.  

 
label.common.footer.alt.autozoneLogo