Volkswagen Golf/Jetta/Cabriole 1990-1999

Crankshaft Damper

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Hex keys may be required to remove the damper bolts



Click image to see an enlarged view

Fig. Once loose, pull the bolts from the damper



Click image to see an enlarged view

Fig. Remove the damper by sliding it off the crankshaft

  1. Remove the negative battery cable.
  2.  
  3. Detach the wheel well splash shield if it interferes with damper removal.
  4.  
  5. Remove any engine accessory drive belts that are driven by the damper
  6.  
  7. Remove the crankshaft damper bolt(s).
  8.  
  9. Remove the crankshaft damper.
  10.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo