Volkswagen Golf/Jetta/Cabriole 1990-1999

Differential Pressure Regulator

Print

REMOVAL & INSTALLATION




NOTE
The differential pressure regulator is located on the CIS-E injection system only.

  1. Disconnect the wiring.
  2.  
  3. Clean any dirt away from the fuel line fitting and remove the fitting.
  4.  
  5. Remove the 2 screws to remove the regulator. The screws are made of non-magnetic material. If the screws must be replaced, make sure they are non-magnetic.
  6.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo