Volkswagen Golf/Jetta/Cabriole 1990-1999

Electric Window Motor

Print

REMOVAL & INSTALLATION



  1. Remove the door panel.
  2.  
  3. Carefully peel off the door screen so that it can be reused.
  4.  
  5. Unbolt the window from the regulator and carefully lower it to the bottom of the door.
  6.  
  7. Disconnect the wiring and remove the motor mounting bolts.
  8.  
  9. Remove the 3 guide rail bolts and lower the motor and guide rail assembly out the bottom of the door.
  10.  
  11. Installation is the reverse of removal.
  12.  


NOTE
The upper cable must be below the guide rail mounting bracket.

 
label.common.footer.alt.autozoneLogo