Volkswagen Golf/Jetta/Cabriole 1990-1999

Seats

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Removing the seat from the front track



Click image to see an enlarged view

Fig. Remove the plastic cover from the rear edge of the seat track



Click image to see an enlarged view

Fig. Remove the fasteners from the rear seat. This may require the use of a hex key



Click image to see an enlarged view

Fig. Once all the bolts have been removed, lift the rear seat out

Front Seats
  1. Slide the seat forward to the stop and remove the track cover beside the tunnel.
  2.  
  3. Remove the acorn nut, washer and bolt at the front of the center seat rail.
  4.  
  5. Pull the seat release handle and push the seat back and out of the tracks. Lift the seat out of the vehicle.
  6.  
  7. Installation is the reverse of removal.
  8.  

Rear Seat
  1. On Golf and Jetta, lift the seat cushion up and pull forward to remove it.
  2.  
  3. On Cabriolet, remove the two screws at the front of the seat cushion and pull forward and up.
  4.  
  5. Release the seat backrest and fold forward.
  6.  
  7. Release the locking lug in the mounting and pull the backrest out of the mounting.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo