Volkswagen Golf/Jetta/Cabriole 1990-1999

Rear Wiper Arm

Print

REMOVAL & INSTALLATION



  1. Flip the cap up and pull it up to remove it.
  2.  
  3. Remove the nut to remove the arm.
  4.  
  5. When installing the arm, the end of the wiper blade should be 0.375 in. (10mm) from the base of the window.
  6.  
  7. Tighten the nut to 5 ft. lbs. (7 Nm). Do not over tighten this nut or the linkage will bind.
  8.  
  9. Install the cap.
  10.  

 
label.common.footer.alt.autozoneLogo