Volkswagen Touareg 2004-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Open the cap on the coolant expansion tank to relieve any residual pressure.
  4.  
  5. Push down on the retaining clips of the upper coolant hose. Loosen the spring clamps on the pipe, then rotate it upward to separate it from the cooling fan mount.
  6.  
  7. Detach the cooling fan connectors.

    Click image to see an enlarged view

    Fig. Detach the coolant pipe assembly from the cooling fan mount



    Click image to see an enlarged view

    Fig. Pull off the securing ring (1) from the brake system vacuum pump

  8.  
  9. Pull off the securing ring from the brake system vacuum pump and lay it aside.
  10.  
  11. Release the retaining clips from the cooling fan mount, then lift the entire cooling fan assembly up and out.
  12.  
  13. If necessary, remove the bolts securing the fan and remove the fan from the mount.
  14.  
  15. Installation is the reverse of removal. Tighten the fan mounting bolts to 7 ft. lbs. (10 Nm).
  16.  

 
label.common.footer.alt.autozoneLogo