Volkswagen Touareg 2004-06

Steering Knuckle

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and properly support the vehicle.
  4.  
  5. Remove the halfshaft from the steering knuckle assembly (refer to the Halfshaft removal and installation procedure).
  6.  
  7. Remove the ball joint nut from the lower control arm and press off the ball stud using a ball joint puller.
  8.  
  9. Remove the steering knuckle from the vehicle.
  10.  
  11. Installation is the reverse of removal. When installing the lower control arm ball joint nut (use a new one), tighten it to 77 ft. lbs. (105 Nm).
  12.  

 
label.common.footer.alt.autozoneLogo