Volvo 240/740/760/780/940/960 1990-1998

Speakers

Print

REMOVAL & INSTALLATION



Door Speakers

See Figures 1, 2 and 3

  1. Remove the door panel(s).
  2.  
  3. Remove the four retaining screws on the speaker assembly.
  4.  
  5. Pull the speaker out and remove the electrical connector from the back.
  6.  

To install:
  1. Install the electrical connector onto the back of the speaker.
  2.  
  3. Place the speaker in the opening in the door.
  4.  
  5. Tighten the four retaining screws.
  6.  
  7. Verify the proper operation of the speaker.
  8.  
  9. Install the door panel.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: When the grille is removed, the speaker mounting screws are exposed



Click image to see an enlarged view

Fig. Fig. 2: Unfasten the mounting screws and remove the speaker from the door



Click image to see an enlarged view

Fig. Fig. 3: Unplug the speaker connection and set the speaker aside in a safe place

Dashboard Speakers

See Figures 4, 5, 6, 7, 8 and 9

  1. Remove the speaker cover on the top of the dashboard by removing the retaining screws.
  2.  
  3. Remove the speaker retaining screws.
  4.  
  5. Pull the speaker out and remove the electrical connector from the back.
  6.  

To install:
  1. Install the electrical connector onto the back of the speaker.
  2.  
  3. Place the speaker in the opening in the dashboard.
  4.  
  5. Tighten the retaining screws.
  6.  
  7. Verify the proper operation of the speaker.
  8.  
  9. Install the speaker cover on the dashboard and tighten the retaining screws.
  10.  



Click image to see an enlarged view

Fig. Fig. 4: Carefully pry up the speaker grille and ...



Click image to see an enlarged view

Fig. Fig. 5: ... remove it from the dashboard



Click image to see an enlarged view

Fig. Fig. 6: Remove the speaker retainers; some models have screws while others have plastic push-in type buttons



Click image to see an enlarged view

Fig. Fig. 7: On this button type retainer, simply depress the center portion so that it pops up before removal



Click image to see an enlarged view

Fig. Fig. 8: After the retainers are removed, pull the speaker from the dashboard



Click image to see an enlarged view

Fig. Fig. 9: Unplug the electrical connector and remove the speaker

Rear Roof Pillar Speakers (Wagon)
  1. Unfasten the grille retaining screws and remove the grille.
  2.  
  3. Remove the speaker retaining screws.
  4.  
  5. Pull the speaker out of the opening and unplug the electrical connector.
  6.  

To install:
  1. Plug in the electrical connector.
  2.  
  3. Install the speaker in the opening and tighten the retaining screws.
  4.  
  5. Install the speaker grille and tighten the retaining screws.
  6.  

Rear Deck Speakers (Sedan)
  1. From under the package tray, remove the grille retaining screws and remove the grille.
  2.  
  3. Remove the speaker retaining screws.
  4.  
  5. Pull the speaker out of the opening and unplug the electrical connector.
  6.  

To install:
  1. Plug in the electrical connector.
  2.  
  3. Install the speaker in the opening and tighten the retaining screws.
  4.  
  5. Install the speaker grille and tighten the retaining screws.
  6.  

 
label.common.footer.alt.autozoneLogo