Volvo 240/740/760/780/940/960 1990-1998

Trunk/Liftgate Lock

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. On 4-door models:
    1. Open the trunk lid and remove the clips in the lower right corner of the trunk lid trim.
    2.  
    3. Bend the trim back carefully to expose the lock cylinder.
    4.  

  4.  
  5. On wagon models:
    1. Remove the liftgate trim panel.
    2.  
    3. Remove any necessary trim to access the lock cylinder.
    4.  

  6.  
  7. Disconnect the lock rod(s) from the lock cylinder.
  8.  
  9. Remove the retaining bolt for the bracket on the lock cylinder.
  10.  
  11. Remove the retaining clip from the lock cylinder.
  12.  
  13. Remove the lock.
  14.  

To install:
  1. Place the lock cylinder into place and attach the clip.
  2.  
  3. Install the bracket and tighten the retaining bolt.
  4.  
  5. Attach the lock rod to the lock cylinder.
  6.  
  7. Ensure the lock cylinder engages the latch mechanism properly.
  8.  
  9. Install any trim removed.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo