Volvo 240/740/760/780/940/960 1990-1998

Headlight Wiper Blades

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4

The small blades for the headlight wipers found on some models are removed in the same fashion as the windshield wiper blades. Pull the wiper away from the light, lift the pivot cover, remove the nut, then remove the blade and arm. It is necessary to disconnect the washer tube from the blade assembly when removing the arm.

During installation, place the wiper blade below the park stop on the light. Tighten the retaining nut and reposition the blade above the stop. The blade should rest firmly on the stop. Don't forget to reattach the washer line.



Click image to see an enlarged view

Fig. Fig. 1: Lift the pivot cover to access the retaining nut ...



Click image to see an enlarged view

Fig. Fig. 2: ... then remove the nut



Click image to see an enlarged view

Fig. Fig. 3: Lift the arm off of the pivot shaft and ...



Click image to see an enlarged view

Fig. Fig. 4: ... detach the washer tube from the blade

 
label.common.footer.alt.autozoneLogo