Volvo 240/740/760/780/940/960 1990-1998

Windshield Washer Motor

Print

REMOVAL & INSTALLATION



Front
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the windshield washer bottle filler pipe.
  4.  
  5. Lift the washer motor out of the washer bottle using needlenose pliers.
  6.  
  7. Undo the wiring connector and the hose from the motor.
  8.  
  9. Remove the washer motor.
  10.  

To install:
  1. Install the hose and wiring connector on the washer motor.
  2.  

It is a good idea to wet or lubricate the end of the motor and filler pipe which extends into the washer bottle to aid in their installation, and to help avoid pushing the rubber grommet into the bottle.

  1. Install the motor into the opening in the washer bottle, being careful not to disturb the rubber grommet.
  2.  
  3. Install the filler pipe into the washer bottle.
  4.  
  5. Fill the washer bottle with the appropriate mixture of solvent.
  6.  
  7. Connect the negative battery cable.
  8.  
  9. Check the operation of the washer motor.
  10.  

Rear (Wagons)
  1. Disconnect the negative battery cable.
  2.  
  3. From underneath the vehicle, remove the washer motor from its bracket.
  4.  
  5. Pull the pump downward to access the wiring connector and hose.
  6.  
  7. Detach the wiring connector and hose.
  8.  

To install:
  1. Install the washer pump into the bracket.
  2.  
  3. Attach the wiring connector and hose.
  4.  
  5. Fill the washer bottle with the appropriate mixture of solvent.
  6.  
  7. Connect the negative battery cable.
  8.  
  9. Check the operation of the washer motor.
  10.  

 
label.common.footer.alt.autozoneLogo