Volvo Cars 1999-05

Brake Pads

Print

Removal & Installation



Front & Rear
  1. Remove or disconnect the following:

    Wheel
     
    Caliper spring
     
    Protective caps
     
    Locating pins
     
    Brake caliper and hang in a suitable position
     
    Brake pads
     

  2.  


NOTE
Do not depress the brake pedal while the brake pads are removed.

To install:

  1. Check the rubber sleeves on the locating pins. Replace if necessary. If necessary, lubricate the locating pins using silicon grease. Insert the locating pins in the rubber sleeves. The locating pins must slide into the sleeves easily.
  2.  
  3. Press the piston back into the cylinder using special tool 999-7091 or equivalent.
  4.  
  5. Install or connect the following:

    Brake pads
     
    Brake caliper
     
    Locating pins
     
    Protective caps
     
    Caliper spring
     
    Wheel
     

  6.  


    Click image to see an enlarged view

    Fig. Compressing the piston into the cylinder

    Compressing the piston into the cylinder

 
label.common.footer.alt.autozoneLogo