- Before servicing the vehicle, refer to the Precautions Section.
With engine off, turn the steering wheel fully to the right and left several times.
NOTEDo not allow the fluid level in the reservoir tank to go below the MIN level line. Check and add fluid as needed.
- Run the engine at idle speed. Turn the steering wheel fully to the right and then fully to the left. Hold for about three seconds. Check for fluid leakage.
Repeat the above step several times at three second intervals.
NOTEDo not hold the steering wheel in the locked position for more than ten seconds.
- Check for air bubbles or cloudy fluid. If found, repeat the bleeding procedure.
- Stop the engine and check the fluid level. Fill as required.