Vue 2002-2005

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the passenger side insulator/closeout panel.

    Click image to see an enlarged view

    Fig. Remove the passenger side insulator/closeout panel

  4.  
  5. Disconnect the electrical connector from the blower motor.
  6.  
  7. Remove the blower motor screws from the HVAC module.
  8.  
  9. Remove the blower motor from the HVAC module.

    Click image to see an enlarged view

    Fig. Remove the blower motor screws from the HVAC module

  10.  

To install:

  1. Install the blower motor to the HVAC module.
  2.  
  3. Install the blower motor screws to the HVAC module.
  4.  
  5. Tighten the screws to 9 inch lbs. (1 Nm).
  6.  
  7. Connect the electrical connector to the blower motor.
  8.  
  9. Install the passenger side insulator/closeout panel.
  10.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the passenger side insulator/closeout panel.

    Click image to see an enlarged view

    Fig. Remove the passenger side insulator/closeout panel retainers (1) and panel (2)

  4.  
  5. Disconnect the electrical connector from the blower motor.
  6.  
  7. Remove the blower motor screws from the HVAC module.
  8.  
  9. Remove the blower motor from the HVAC module.

    Click image to see an enlarged view

    Fig. Remove the blower motor screws from the HVAC module

  10.  

To install:

  1. Install the blower motor to the HVAC module.
  2.  
  3. Install the blower motor screws to the HVAC module.
  4.  
  5. Tighten the screws to 9 inch lbs. (1 Nm).
  6.  
  7. Connect the electrical connector to the blower motor.
  8.  
  9. Install the passenger side insulator/closeout panel.
  10.  

 
label.common.footer.alt.autozoneLogo