Vue 2002-2005

2.2L I4 VIN D Auto 2

Print

Trouble Code: P0452



Fuel Tank Pressure Sensor Circuit Low Input

Possible Causes:



FTP sensor signal circuit is shorted to sensor ground
 
FTP sensor VREF circuit is open or shorted to ground
 
FTP sensor is damaged or it has failed
 
PCM has failed
 

Trouble Code: P0453



Fuel Tank Pressure Sensor Circuit High Input

Possible Causes:



FTP sensor signal circuit is shorted to VREF (5v)
 
FTP sensor ground circuit is open
 
FTP sensor is damaged or it has failed
 
PCM has failed
 

Trouble Code: P0461



Fuel Level Sensor Signal Range/Performance

Possible Causes:



Fuel level sensor is stuck in one position
 
Fuel level sensor is damaged or it has failed
 
High resistance in the fuel level sensor ground circuit
 
Loose fuel tank baffle interfering with the fuel level sensor
 
PCM has failed
 

Trouble Code: P0462



Fuel Level Sensor Circuit Low Input

Possible Causes:



Fuel level sensor is stuck in one position
 
Fuel level sensor signal circuit is shorted to ground
 
Fuel level sensor is damaged or it has failed
 
Loose fuel tank baffle interfering with the fuel level sensor
 
PCM has failed
 
TSB 00-08-45-004A contains a repair procedure for this code
 

Trouble Code: P0463



Fuel Level Sensor Circuit High Input

Possible Causes:



Fuel level sensor is stuck in a single position
 
Fuel level sensor signal circuit is shorted to VREF power
 
Fuel level sensor ground circuit is open
 
Fuel level sensor is damaged or it has failed
 
PCM has failed
 

Trouble Code: P0480



Cooling Fan Relay Control Circuit Malfunction

Possible Causes:



CFAN relay control circuit is open or shorted to ground
 
CFAN relay control circuit is shorted to system power
 
CFAN relay power circuit is open (check the Cooling Fan fuse)
 
CFAN relay is damaged or it has failed
 
PCM has failed (the internal control driver is damaged)
 

Trouble Code: P0481



High Speed Cooling Fan Relay Control Circuit Malfunction

Possible Causes:



CFAN relay control circuit is open or shorted to ground
 
CFAN relay control circuit is shorted to system power
 
CFAN relay power circuit is open (check the Cooling Fan fuse)
 
CFAN relay is damaged or it has failed
 
PCM has failed (the internal control driver is damaged)
 

Trouble Code: P0532



A/C Refrigerant Pressure Sensor Circuit Low Input

Possible Causes:



A/C refrigerant pressure sensor connector damaged or shorted
 
A/C refrigerant pressure sensor circuit is shorted to ground
 
A/C refrigerant pressure VREF circuit is open or shorted
 
A/C refrigerant pressure sensor is damaged or it has failed
 
PCM has failed
 

Trouble Code: P0560



System Voltage Signal Range/Performance

Possible Causes:



Main relay output circuit is open (may be an intermittent fault)
 
Main relay is damaged (use the repair chart for U2105 for diagnosis of the main relay)
 
Possible high resistance condition in the fusible link to battery
 
PCM is damaged
 
Vehicle may have been used to "jump start" another vehicle
 

Trouble Code: P0562



System Voltage Too Low

Possible Causes:



Ignition system voltage circuit has a high resistance condition
 
Generator is damaged or it has failed (generator output too low)
 
Possible high resistance condition in the fusible link to battery
 
PCM has failed
 
Vehicle may have been used to "jump start" another vehicle
 

Trouble Code: P0563



System Voltage Too High

Possible Causes:



Ignition system voltage circuit has a high resistance condition
 
Generator is damaged or it has failed (generator output too low)
 
Possible high resistance condition in the fusible link to battery
 
PCM has failed
 
Vehicle may have been used to "jump start" another vehicle
 

Trouble Code: P0601



PCM Or TCM Memory Error

Possible Causes:



Perform the Diagnostic System Check for the PCM or the TCM
 
Record any related trouble codes in memory
 
PCM has failed (replace and reprogram the PCM or TCM)
 
Perform the Security System (Passlock) Relearn Procedure
 

Trouble Code: P0602



PCM Or TCM Not Programmed

Possible Causes:



Perform the Diagnostic System Check for the PCM or TCM
 
Record any related trouble codes in memory
 
Reprogram the PCM or TCM and recheck for related trouble codes. If the same code resets, replace and reprogram the PCM or the TCM (depending upon which one set the code).
 
Perform the Security System (Passlock) Relearn Procedure
 

Trouble Code: P0603



PCM or TCM NVRAM Memory Error

Possible Causes:



Record any related trouble codes in memory
 
PCM has failed (replace it and reprogram the new PCM)
 
Perform the Security System (Passlock) Relearn Procedure
 

Trouble Code: P0606



PCM Internal Performance Malfunction

Possible Causes:



Record any related trouble codes in memory
 
Reprogram the PCM and recheck for any related trouble codes
 
If it resets, the PCM may have to be replaced
 
PCM has failed (replace it and reprogram the new PCM)
 
Perform the Security System (Passlock) Relearn Procedure
 

Trouble Code: P0621



Generator 'L' Terminal Circuit Malfunction

Possible Causes:



Generator 'L' circuit is open, shorted to ground or to power (B+)
 
Generator it has failed
 
PCM has failed
 
TSB 01-06-04-051 contains a repair procedure for this code
 

Trouble Code: P0622



Generator 'F' Terminal Circuit Malfunction

Possible Causes:



Generator 'F' circuit is open, shorted to ground or to power (B+)
 
Generator it has failed
 
PCM has failed
 

Trouble Code: P0705



Transaxle Range Switch Circuit Malfunction

Possible Causes:



TR switch circuit(s) is open or shorted to ground
 
TR switch circuit(s) is shorted to system power (B+)
 
TR switch is damaged, out of adjustment or it has failed
 

Trouble Code: P0711



TFT Sensor Signal Range/Performance

Possible Causes:



TFT sensor connector has an intermittent open or shorted fault
 
TFT sensor is contaminated, damaged or "skewed"
 
TFT sensor signal or ground circuit has a high resistance fault
 
TCM has failed
 

Trouble Code: P0712



TFT Sensor Circuit Low Input

Possible Causes:



TFT sensor connector is damaged or shorted to ground
 
TFT sensor signal circuit is shorted to sensor ground
 
TFT sensor is damaged or it has failed
 
TCM has failed
 

Trouble Code: P0713



TFT Sensor Circuit High Input

Possible Causes:



TFT sensor connector is damaged, loose or open
 
TFT sensor signal or ground circuit is open
 
TFT sensor is damaged or it has failed
 
TCM has failed
 

Trouble Code: P0716



A/T Input Shaft Speed Sensor Circuit Intermittent

Possible Causes:



ISS assembly connector is damaged or loose
 
ISS circuit is open, shorted to ground or to power (Intermittent)
 
ISS wiring routed too close to Generator, spark plug wires or any other possible cause of EMI/RFI interference
 
ISS is damaged or it has failed
 
PCM has failed
 

Trouble Code: P0717



Input Shaft Speed Sensor Circuit Low Input

Possible Causes:



ISS assembly connector is damaged or shorted
 
ISS circuit is open or shorted to ground
 
ISS is damaged (sensor resistance is from 800-1800 ohms)
 
PCM has failed
 

Trouble Code: P0719



Brake Switch Circuit Low Input

Possible Causes:



Brake switch stuck in open position or brake switch circuit open
 
Brake switch power circuit is open (check the STOP 15A fuse)
 
Stop lamp switch is damaged, out of adjustment or it has failed
 
TCM has failed
 

Trouble Code: P0722



Output Shaft Speed Sensor Circuit Low Input

Possible Causes:



OSS connector is damaged, open or shorted
 
OSS circuit is open, shorted to ground or to system power
 
OSS reluctor air gap is excessive or out of alignment
 
OSS reluctor is damaged, or the OSS assembly has failed
 
PCM has failed
 

Trouble Code: P0723



Output Shaft Speed Sensor Signal (Intermittent)

Possible Causes:



OSS connector is damaged, open or shorted (intermittent fault)
 
OSS circuit is open, shorted to ground or to power (intermittent)
 
OSS reluctor is damaged, or the OSS assembly has failed
 
PCM has failed
 

Trouble Code: P0724



Brake Switch Circuit High Input

Possible Causes:



Brake switch stuck in -closed- position
 
Brake switch circuit is shorted to system power (B+)
 
Stop lamp switch is damaged, out of adjustment or it has failed
 
TCM has failed
 

Trouble Code: P0727



Engine Speed Circuit To TCM Malfunction

Possible Causes:



Perform the Diagnostic System Check for the PCM
 
PCM has failed
 

Trouble Code: P0731



Transaxle - No First Gear Available

Possible Causes:



If any Shift Solenoid performance codes are set (P0781, P0782 or P0783 for 2nd, 3rd or 4th gear stuck "on"), fix the highest gear code first. A gear stuck "on" will cause a loss of 1st Gear.
 
End cover 1st gear hub seal rings may be damaged
 
1st clutch piston may be leaking
 
Input shaft feed tube to end cover may be blocked
 
Servo leak, passage blocked (no oil pressure to 1st gear clutch)
 
1st gear spray failed or 1st gear clutch plates may be worn
 
1st gear shift solenoid is damaged or it has failed
 
TSB 99-07-30-018 contains a repair procedure for this code
 
TSB 03-07-30-008 contains a repair procedure for this code
 

Trouble Code: P0732



Transaxle - No Second Gear Available

Possible Causes:



If any shift solenoid performance codes are set (P0782 or P0783 for 3rd or 4th gear stuck "on"), fix the highest gear code first. A 3rd or 4th gear stuck "on" will cause a loss of 2nd Gear.
 
3rd or 4th Gear Shift solenoid sticking will cause 3rd or 4th gear to be applied from a standing stop and cause loss of 2nd Gear
 
2nd gear shift solenoid is damaged or it has failed
 
TSB 99-07-30-018 contains a repair procedure for this code
 

Trouble Code: P0733



Transaxle - No Third Gear Available

Possible Causes:



If any shift solenoid performance codes is set (P0783 for 4th gear stuck "on"), fix that trouble code first. A 4th gear stuck "on" condition can cause a loss of 3rd gear, a loss of 4th gear, and the TCC may be stuck in "on" position.
 
4th Gear Shift solenoid sticking will cause 4th gear to be applied from a standing stop and cause a loss of 3rd Gear.
 
3rd gear shift solenoid is damaged or it has failed
 

Trouble Code: P0734



Transaxle - No Fourth Gear Available (AF23-5)

Possible Causes:



Delivery tube busing in the output shaft miss-located or loose
 
Plugged or restricted oil passages or faulty clutch plates
 
Piston seal cut or damaged
 
Output shaft check ball is missing
 
Output shaft seal, Output shaft or 4th clutch 'O' rings damaged
 
4th gear shift solenoid is damaged or it has failed
 

Trouble Code: P0741



TCC System Malfunction (AF23-5, VT25-E)

Possible Causes:



Control valve body may need removal for inspection (inspect for a sticking lockup relay valve, lockup control valve, TCC check valve, secondary regulator valve, solenoid relay valve or a sticking TCC lockup PC solenoid valve assembly)
 
Inspect for problems in the torque converter assembly, input shaft and fluid pump stator shaft assembly
 
ISS sensor is damaged or it has failed
 
Stuck 3-4, 4-5 shift solenoid valve, or stuck U1 shift valve
 
Transmission may be damaged and require replacement
 
TCM turns the Transmission Protection Mode -on-
 

Trouble Code: P0742



TCC System Malfunction (AF23-5, VT25-E)

Possible Causes:



Control valve body may need removal for inspection (inspect for a sticking lockup relay valve, lockup control valve, TCC check valve, secondary regulator valve, solenoid relay valve or a sticking TCC lockup PC solenoid valve assembly)
 
Inspect for problems in the torque converter assembly, input shaft and fluid pump stator shaft assembly
 
ISS sensor is damaged or it has failed
 
Transmission may be damaged and require replacement
 
TCM turns the Transmission Protection Mode -on-
 

Trouble Code: P0748



Transaxle Fluid Line Pressure Too High

Possible Causes:



PCS (solenoid) is damaged or it has failed
 
Pressure regulator it has failed (take the valve body apart to inspect for this problem and replace any necessary parts)
 
PCS control circuit is damaged or it has failed
 
PCM has failed
 

Trouble Code: P0751



Transaxle 1-2 Shift Solenoid Performance (Stuck Off)

Possible Causes:



A/T 1-2 shift solenoid is stuck "off"
 
A/T 1-2 shift solenoid valve is plugged
 

Trouble Code: P0752



Transaxle 1-2 Shift Solenoid Performance (Stuck On)

Possible Causes:



1-2 shift solenoid is stuck "on"
 
1-2 shift solenoid valve is plugged
 

Trouble Code: P0753



Transaxle 1-2 Shift Solenoid Control Circuit Malfunction

Possible Causes:



1-2 shift solenoid control circuit is open or shorted to ground
 
1-2 shift solenoid control circuit is shorted to system power
 
1-2 shift solenoid power circuit is open (sets P0753 and P1860)
 
1-2 shift solenoid is damaged or it has failed
 
PCM has failed
 

Trouble Code: P0756



Transaxle Shift Solenoid 2-3 Performance (Stuck On)

Possible Causes:



2-3 solenoid valve is stuck -on-
 
2-3 shift valve is stuck "on"
 
2-3 shift solenoid valve is plugged or leaking
 
PCM has failed
 

Trouble Code: P0757



Transaxle Shift Solenoid 2-3 Performance (Stuck Off)

Possible Causes:



2-3 shift solenoid is stuck -off-
 
2-3 shift valve is stuck "off"
 
2-3 shift solenoid valve is plugged or leaking
 
PCM has failed
 

 
label.common.footer.alt.autozoneLogo