Vue 2002-2005

Axle Shaft Seal

Print

Removal & Installation



Left
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the left rear wheel and tire assembly.
  4.  
  5. Remove the left rear wheel halfshaft.
  6.  
  7. Carefully pry out the output shaft seal and discard.

    Click image to see an enlarged view

    Fig. Carefully pry out the output shaft seal

  8.  

To install:

  1. Install the new output shaft seal using the J 44809, Output Shaft Seal Installer .
  2.  
  3. Install the left rear wheel drive shaft.
  4.  
  5. Inspect the rear drive module fluid level.
  6.  
  7. Install the left rear wheel and tire assembly.
  8.  
  9. Lower the vehicle.
  10.  

Right
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the right rear wheel and tire assembly. Refer
  4.  
  5. Remove the right rear wheel drive shaft.
  6.  
  7. Carefully pry out the output shaft seal and discard.

    Click image to see an enlarged view

    Fig. Carefully pry out the output shaft seal

  8.  

To install:

  1. Install the new output shaft seal using the J 44809, Output Shaft Seal Installer .
  2.  
  3. Install the right rear wheel drive shaft.
  4.  
  5. Inspect the rear drive module fluid level.
  6.  
  7. Install the right rear wheel and tire assembly.
  8.  
  9. Lower the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo